INSPIRE Ceramic Coat
Inspire is a next-generation ceramic coating for enthusiasts characterized by its quick and easy application and excellent self-cleaning properties.
It contains the addition of CNT, which makes the surface hydrophobic, gives it an amazing gloss and slightly darkens it.
- quick and easy application,
- superhydrophobicity and high durability
- high slickness of the surface
- chemical and UV resistance
- wide spectrum of application conditions (temp. 8-35 degrees / air humidity 30-80%)
- fast curing (12h)
- high ease of cleaning – this allows you to reduce the use of chemicals / there is no need to use aggressive chemicals
A coating that will transform your car. The paintwork after the application of the coating is strongly glazed and gains color depth!
up to 18 months or up to 20,000 km (in the case of using Ceramic Booster, this period may be extended).
The coating that protects your car from UV radiation, bird droppings, acid rain and other harsh weather conditions!
The Inspire coating was created especially for detailers and enthusiasts! The application is simple, fast and fun, and the end result is stunning! Inspire makes the surface hydrophobic, gives it an amazing gloss and slightly darkens it! The coating will create an invisible shield that will protect your car from UV radiation, bird droppings, acid rain and other weather conditions. With the coating applied, it is easier to keep the paint clean. Washing time is reduced by up to 50%, and there is no need to use aggressive chemicals.
Composition
The addition of graphene and carbon nanotubes significantly improves antistatic (reduces dust attraction), flexibility, UV protection and heat distribution, which increases the resistance of the coating to high temperatures!
User manual
How to use
- Before use, shake the bottle for at least 30 seconds. During application, particles of the component will still be visible, but shaking the product will prevent it from settling at the bottom of the bottle. Repeat this step before each application.
- Prepare the surface (paintwork/rims/windows/plastics/tires/other rubber elements) – removing all contaminants from it – especially such as tar or iron fallout. If necessary, polish the paintwork to remove all imperfections in 100%. Degrease the prepared surface with a IPA 50% solution.
- Apply the product in sections (e.g. 40x40cm) and cross, overlapping movements using the attached applicator – in the case of paitwork, glass, plastics – or a microfiber applicator – in the case of tires, rubber elements.
- Within 1-2 minutes after application, buff the product with a microfiber until the streaks are completely removed.
- In the case of glass and plastic elements, after 1-2 minutes. remove the excess of the coating.
- In the case of tires, a lot depends on the model and age of the tires – old tires tend to “absorb” the coating, while new ones require buffing/removing the excess coating after application within approx. 1-2 minutes.
- Covering a medium-sized car with the coating is about 20ml (paint only), 10ml (rims), 20ml (windows + plastics + tires).
- Do not allow the coating to dry without buffing out!
Caution
- Carry out applications in a closed, well-ventilated room.
- Outdoor application is also possible, but it is important not to do it direct sunlight or during strong winds.
- Do not coat hot surfaces!
- Allow the coating to bond with the paint for at least 12 hours. Do not allow interaction with water, rain or other precipitation during this time.
- If the paintwork gets wet during the first 12 hours, dry the car with a delicate microfiber, not allowing the water to dry out on its own.
- We recommend not washing the car for the first 5-7 days with car chemicals. If necessary, rinse the car with demineralized water only (the last program on the touchless car wash).
- The coating is fully activated after 24 hours.
- Use proven washing products – the coating is resistant to cleaning agents in the pH range of 3-12.
- Keep the product away from fire.
- Use gloves and a mask for application!
- In case of damage to the hydrophobic part of the coating – use Cleantle Ceramic Booster to restore the hydrophobic properties or apply the coating again.
- To extend the life of the coating – use Cleantle Ceramic Booster once every 10,000. km or once every 6 months.
- Expiration date: 2 years from opening the bottle.
