Edgeless Polishing Microfiber Finisher
Cleantle Finisher is an edgeless 40×40 cm microfiber with a weight of 590 gsm. It is designed for applying and buffing quick detailers, sealants and waxes. The dense, thick pile spreads the product evenly and releases it gradually. As a result, the product goes on without streaks and you remove the excess in a single move. The microfiber has no stitched edges, so only soft fibre touches the paint.
- edgeless design
- high weight of 590 gsm
- even spreading of the product
- excess removed in a single pass
- for quick detailers, sealants and waxes
Size: 40×40 cm
Weight: 590 gsm
With no stitched edges, only soft fibre touches the paint, even at the edges of the microfiber.
A thin, even layer is the key with wax and sealant. Finisher spreads the product over the whole panel, and for buffing you simply turn it to a clean side.
The microfiber works with quick detailers, sealants, waxes and spray coatings.
Applying and buffing
Finisher is the microfiber for the final stage of paint care. Apply the product, wait a moment, then turn the microfiber to a clean side and buff the paint dry. It works great with Cleantle EasyOne QD and Cleantle Ceramic Booster. For cleaning the interior and glass, we recommend the thinner Daily Cloth and Streakless microfibers.
For hand polishing
Finisher is designed for hand polishing, meaning buffing the product to a shine. It does not replace a machine polishing pad or polishing compound.
Facts about Finisher
What it is: an edgeless microfiber for applying and buffing products on paint.
For: quick detailers, sealants, waxes, spray coatings.
How to use: apply the product to the microfiber or the paint, spread it, wait as the product instructions say and buff with a clean side.
Size: 40×40 cm.
Weight: 590 gsm.
Washing: max. 40°C, with Cleantle Fabriclean+, no fabric softener; tumble dry on low or air dry, do not iron.
User manual
How to use
- Apply the product to the microfiber or directly to the paint and spread it evenly, adjusting the pressure to the surface.
- Wait as long as the instructions of the product say.
- Buff the surface dry with a clean side of the microfiber.
Washing and care
- We recommend washing at 40 degrees with Cleantle Fabriclean+.
- Do not use fabric softener.
- Tumble dry on low or air dry. Do not iron.
